DESCRIPTION

FEATURE:

ZT9800 is one component, structural silicone sealant, neutral and room temperature curing, excellent adhesive strength for aluminum composite panels. It is non-corrosive, has excellent weatherproofing, excellent high and low temperature resistant performance, properties remained within serviceable range of -40℃—120℃, high strength, high adhesion, intermediate modulus, have good compatibility with ZT series neutral silicone rubber.

SCOPE OF USE:

  • Structural sealing of curtain walls.

  • Two bonded sealing of hollow glass.

  • Other building construction application that confirmed by the detection of qualified.

INSTRUCTIONS:

  • Use acetone or other solvents to clean the surface of glued materials with two pieces cloth.

  • Stick on low viscosity adhesive tape to protect the area you want, rip off the tape before sealant cured.

  • The compatibility and adhesive stress testing before using required, to make sure product and substrate can adhesive fully. The company shall not be liable for any losses because of any accident.

USE RESTRICTION:

Not suitable for materials surface that bleed grease or contain grease, frost-laden or wet surface, airless place, temperature below 4℃ or above 40℃.

IMPORTANT NOTES:

  • Used in well-ventilated environment.

  • Avoid contact with eyes, in case of contact with eyes, rinse clean with water immediately, and please seek medical assistance.

  • Keep out of children’s reach.

PACKING SPECIFICATION:

  • Plastic packaging, 300ml/tube, 24tubes/ctn.

  • Aluminum packaging, 590ml/tube, 20tubes/ctn; 500ml/tube, 20tubes/ctn; 300ml/tube, 35tubes/ctn.

ZT9800 PARAMETER CONFIGURATION TABLE
PERFORMANCE CATEGORY STANDARD CODE MEASURED VALUES
ONE COMPONENT TWO COMPONENT
SAG(mm) ≤3 0  
EXTRUDABILITY
(s)
≤10 1.58  
SURFACE DRYING TIME(h) ≤3 0.5  
SHORE(SHORE A) 20-60 41  
TENSILE ADHESIVE STRENGTH(MPa) 0.6 1.16  
23℃MAX STRENGTH ELONGATION(%) 100% 196  
STORAGE LIFE Should be stored in a dry and shade place, temperature below 27℃, 9 months for shelf life since the date of production.
.

INQUIRY NOW

* Verification: Click the image to get a different security code. Click image to get a different Verification

Copyright © Zhejiang Zhongtian Fluorine Silicon Material Co., Ltd. 2006-2015. All rights reserved. Power by Wanbong