DESCRIPTION

FEATURE:

ZT958 is one component, acetoxy, room temperature curing, easy to use; Fast cure, easy to use; Excellent weatherproofing, long performance life.

SCOPE OF USE:

  • Sealing of glass engineering indoor and outdoor.

  • Gap sealing of all kinds of decoration, sealing of system cabinet.

  • The installation of aluminum alloy glazed door and window.

USE RESTRICTION:

  • Not suitable for contact with alkaline substances to the surface, such as, marble, granite and so on.

  • Not suitable for the materials surface with grease seep, plasticizing agent or solvent.

  • Not suitable to use in non-ventilated place, because silicone sealant can cure by absorbing moisture from the air.

  • Not suitable for the total water immersion places or wet places all the year round.

  • Not suitable for frosting and wet surface.

  • Not suitable to use when the temperature of the materials surface is lower than 4℃ or higher than 50℃.

IMPORTANT NOTES:

  • Used in well-ventilated environment.

  • Keep out of children’s reach, to avoid eating.

  • Avoid contact with eyes, in case of contact with eyes, rinse clean with water immediately, and please seek medical assistance.

PACKING SPECIFICATION:

Plastic packaging, 300ml/tube, 24tubes/ctn.

 
ZT958 PARAMETER CONFIGURATION TABLE
PERFORMANCE CATEGORY
STANDARD CODE
MEASURED VALUES
ONE COMPONENT
TWO COMPONENT
SAG(mm)
≤3
0
 
EXTRUDABILITY
(ml/min)
≥80
239
 
SURFACE DRYING TIME(h)
≤3
0.15
 
23℃TENSILE MODULUS(MPa)
>0.4
0.68
 
TENSILE PROPERTIES AT MAINTAI
NON-DESTRUCTIVE
NON-DESTRUCTIVE
 
STORAGE LIFE
Should be stored in a dry and shade place, temperature below 27℃, 9 months for shelf life since the date of production.
.

INQUIRY NOW

* Verification: Click the image to get a different security code. Click image to get a different Verification

Copyright © Zhejiang Zhongtian Fluorine Silicon Material Co., Ltd. 2006-2015. All rights reserved. Power by Wanbong