DESCRIPTION

FEATURE:

ZT928 is one component, acetoxy, room temperature curing, easy to use, highly cost effective.

SCOPE OF USE:

  • The installation of all kinds of doors and Windows.

  • Gap sealing of all kinds of decoration.

USE RESTRICTION:

  • Not suitable for contact with alkaline substances to the surface, such as, marble, granite and so on.

  • Not suitable for the materials surface with grease seep, plasticizing agent or solvent.

  • Not suitable to use in non-ventilated place, because silicone sealant can cure by absorbing moisture from the air.

  • Not suitable for the total water immersion places or wet places all the year round. 

  • Not suitable for frosting and wet surface.

  • Not suitable to use when the temperature of the materials surface is lower than 4℃ or higher than 50℃.

IMPORTANT NOTES:

  • Used in well-ventilated environment.

  • Keep out of children’s reach, to avoid eating.

  • Avoid contact with eyes, in case of contact with eyes, rinse clean with water immediately, and please seek medical assistance.

PACKING SPECIFICATION:

Plastic packaging, 300ml/tube, 24tubes/ctn.

ZT928 PARAMETER CONFIGURATION TABLE
PERFORMANCE CATEGORY STANDARD CODE MEASURED VALUES
ONE COMPONENT TWO COMPONENT
SAG(mm) ≤3 0  
EXTRUDABILITY
(ml/min)
≥80 239  
SURFACE DRYING TIME(h) ≤3 0.12  
23℃TENSILE MODULUS(MPa) >0.4 0.52  
TENSILE PROPERTIES AT MAINTAI NON-DESTRUCTIVE NON-DESTRUCTIVE  
STORAGE LIFE Should be stored in a dry and shade place, temperature below 27℃, 9 months for shelf life since the date of production.

 .

INQUIRY NOW

* Verification: Click the image to get a different security code. Click image to get a different Verification

Copyright © Zhejiang Zhongtian Fluorine Silicon Material Co., Ltd. 2006-2015. All rights reserved. Power by Wanbong