DESCRIPTION

FEATURE:

ZT9000 is one component, neutral and room temperature curing weatherproofing silicone sealant, easy to use; excellent weatherproofing, long performance life, unaffected by sunlight, ultraviolet, rain, snow, ozone and extreme high and low resistant temperature; Excellent adhesion, have strong adhesive strength for most of building construction; Excellent tensile and shrinkage properties, properties remained within serviceable range of -50℃—150℃, without brittle, crazing or cracking.

SCOPE OF USE:

• Non-structural sealing for curtain walls.

• Gap sealing of aluminum plate and stone curtain walls.

• Gap sealing of concrete, brick, ceramic, plastics and metal plate.

USE RESTRICTION:

• Not suitable for materials surface that bleed grease or contain grease, frost-laden or wet surface, airless place, temperature below 4℃ or above 40℃.

• Not used as structural sealant.

IMPORTANT NOTES:

• Used in well-ventilated environment.

• Avoid contact with eyes, in case of contact with eyes, rinse clean with water immediately, and please seek medical assistance.

• Keep out of children’s reach.

PACKING SPECIFICATION:

• Plastic packaging, 300ml/tube, 24tubes/ctn.

• Aluminum packaging, 590ml/tube, 20tubes/ctn; 500ml/tube, 20tubes/ctn; 300ml/tube, 35tubes/ctn.

ZT9000 PARAMETER CONFIGURATION TABLE PERFORMANCE CATEGORY STANDARD CODE MEASURED VALUES ONE COMPONENT TWO COMPONENT SAG(mm) ≤3 0   EXTRUDABILITY (ml/min) ≥80 265   SURFACE DRYING TIME(h) ≤3 0.47   ELASTIC RECOVERY（％） ≥80 98   23℃TENSILE MODULUS(MPa) >0.4 0.89   TENSILE PROPERTIES AT MAINTAI NON-DESTRUCTIVE NON-DESTRUCTIVE   STORAGE LIFE Should be stored in a dry and shade place, temperature below 27℃, 9 months for shelf life since the date of production.

.

INQUIRY NOW